Gigabyte 6EXDR, User Manual

Page: 10 / 74

6EXDR Motherboard
3
Summary Of Features
Form Factor
y
30.4 cm x 24.3 cm ATX size form factor, 6 layers PCB.
y
250 watt or higher power supply required
CPU
y
Dual ZIF PGA370 Socket
y
Intel Pentium III FC-PGA
y
Two onboard VRMs (VRM 8.4 spec V2.5)
y
100/133 MHz Front Side Bus support
Chipset
y
ServerWorks ServerSet
TM
III LE Chipset
y
Integrated I/O APIC
y
Full peer-to-peer support
Memory
y
Four 25° angled 168-pin DIMM sockets
y
Support only 3.3V PC-100/PC133 registered 72 bit
ECC type SDRAM
DIMM.
y
Maximum up to 4 GB.
I/O Controller
y
NS PC97317VUL Super I/O Chip
Slots
y
Two PCI slots supports 33MHz & PCI 2.2 compliant
y
Two PCI-64bit/66Mhz slots & PCI 2.2 compliant
y
PCI Raiser Card (Optional)
On-Board IDE
y
Support for UDMA33 IDE and ATAPI compliant
devices.
y
Supports for dual channel master mode and up to 4
enhance IDE devices.
On-Board SCSI
y
Integrated LSI SYM53C1010-66 Chipset with
64b/66MHz
y
Supports dual channel Ultra160 SCSI
y
160MBps throughput and up to 15 devices per channel
y
Channel A and B: 68-pin connectors
On-Board
Peripherals
y
1 floppy port supports 2 FDD with 360K, 720K, 1.2M,
1.44M and 2.88M bytes
y
1 parallel ports supports Normal/EPP/ECP mode
y
2 9-pin UART serial ports (COM 1 & COM 2)
(one serial port via cable- optional)
y
4 USB ports
On-Board VGA
y
Onboard Ati Rage XL PCI Accelerator
y
Standard 15-pin analog VGA port
y
8MB SDRAM frame buffer
To be continued…