manualshive.com logo in svg

Gigabyte 6BXD, User Manual

Share
Download
Gigabyte 6BXD User Manual Download Page 58

6BXD

4-21

Time ( hh: mm: ss) Alarm :

(0~23) : (0~59) : (0~59)

•

IRQ [3-7,9-15] , NMI

The default value is Enabled.

Disabled

Disable this function.

Enabled

Enable monitor IRQ [3-7,9-15] for Green event.

•

Primary IDE 0/1

The default value is Disabled.

Disabled

Disable this function.

Enabled

Enable monitor Primary IDE 0/1 for Green event.

•

Secondary IDE 0/1

The default value is Disabled.

Disabled

Disable this function.

Enabled

Enable monitor Secondary IDE 0/1 for Green event.

•

Floppy Disk

   The default value is Enabled.

Disabled

Disable this function.

Enabled

Enable monitor Floppy Disk for Green event.

•

Serial Port

The default value is Enabled.

Disabled

Disable this function.

Enabled

Enable monitor Serial Port for Green event.

•

Parallel Port

The default value is Disabled.

Disabled

Disable this function.

Enabled

Enable monitor Parallel Port for Green event.

Summary of Contents for 6BXD












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands