manualshive.com logo in svg

Gigabyte 6BXD, User Manual

Share
Download
Gigabyte 6BXD User Manual Download Page 57

BIOS Configuration

4-20

Hour

•

HDD Power Down

The default value is Disable.

Disable

Disable HDD Power Down mode function.

1-15 mins.

Enable HDD Power Down mode between 1 to 15 mins.

•

Suspend Mode Option (Optional)

The default value is PowerOn Suspend.

PowerOn Suspend

Set the system to PowerOn Suspend mode

Suspend to Disk

Set the system to Suspend to Disk mode

•

   VGA Active Monitor

The default value is Disabled.

Disabled

Disable monitor VGA activity.

Enabled

Enable monitor VGA activity.

•

Soft-off by PWR-BTTN

The default value is Instant-Off.

Instant-off

Soft switch ON/OFF for POWER ON/OFF.

Delay 4 Sec.

Soft switch ON 4sec. for POWER OFF.

•

CPUFAN Off In Suspend

The default value is Enabled.

Disabled

Disable this function.

Enabled

Stop CPU FAN when entering Suspend mode.

•

Resume by Alarm

The default value is Disabled.

Disabled

Disable this function.

Enabled

Enable alarm function to POWER ON system.

 If the “ Resume by Alarm”  is Enabled.

Date ( of Month) Alarm :

0~31

Summary of Contents for 6BXD












































































Reviews:

No comments

Brands by name

Popular brands

Load more brands