background image

BIOS Setup

 

62 

  PM Control by APM   

Yes 

Enabled PM Control by APM. 

(Default value)

 

No 

Disabled this function. 

  Video off Option  

Suspend

g

Off 

BIOS will turn off V/H-SYNC when gets into Green mode for 
Green monitor power saving.

 (Default value)

 

All Modes

g

Off 

BIOS will turn off V/H-SYNC when all modes. 

Always On 

BIOS will turn always on when all modes. 

  Video off Method  

V/H SYNC+Blank  BIOS will turn off V/H-SYNC when gets into Green mode for 

Green monitor power saving.

 

 

Blank Screen 

BIOS will only black monitor when gets into Green mode. 

DPMS Support 

BIOS will use DPMS Standard to control VGA card. (The Green 
type VGA card will turn off V/H-SYNC automatically.) 

(Default value)

 

  MODEM Use IRQ  

NA 

Set MODEM Use IRQ to NA. 

Set MODEM Use IRQ to 3.  

Set MODEM Use IRQ to 4.

 (Default value)

 

Set MODEM Use IRQ to 5. 

Set MODEM Use IRQ to 7. 

Set MODEM Use IRQ to 9. 

10 

Set MODEM Use IRQ to 10. 

11 

Set MODEM Use IRQ to 11. 

  Soft-off by PWR-BTTN  

Instant-off 

Soft switch ON/OFF for POWER ON/OFF. 

(Default value)

 

Delay 4 Sec. 

Soft switch ON 4sec. for POWER OFF. 

  AC Back Function 

Memory 

This function depends on computer status. 

(Default value)

 

Soft-Off 

Set System Soft-Off Status. 

Full-On 

Set System Full-On Status. 

Summary of Contents for 5VMM
























































































Reviews: