6 - INSTRUCTIONS FOR USE
0060_GB_99
- PYROCERAM AND INDUCTION HOBS
13
· 20
Breakdown type
Possible reason
Repair
Green Led off
red Led off
Green Led on
red Led off
Green Led flashing
red LEd off
Green Led flashing
red Led off
Green Led flashing
red Led off
Green Led on
red Led on
No heating
There is no power supply.
Check that the generator is
connected to the power supply.
Make sure you have turned the knob
in a clockwise direction.
Defective control Board.
Defective fan.
Unsuitable saucepan.
Check and clean air inlet
and outlet.
Make sure you have positioned
the saucepan correctly.
Turn the knob.
Air inlet or outlet blocked.
Call a technician.
Position a suitable saucepan
correctly.
No heating
(the power part of the
generator is too hot)
Green Led on
red Led on
Call a technician.
Use a suitable saucepan.
The power component is too hot and
has switched on the power reduction
automatically.
Make sure that the saucepan
is suitable.
Position the saucepan
correctly.
Internal temperature high due to
insufficient cooling.
Unsuitable saucepan.
Replace with a suitable
saucepan.
Excessively fast increase in
pyroceram temperature. You could
be using an empty saucepan.
Adjust the power on the basis
of the quantity of food.
Saucepan not positioned
correctly and thus not recognised.
Use a suitable saucepan.
Cooking point sensor defective.
Saucepan diameter smaller
than 160 mm.
Let cool down
by the ventilator.
Green Led on
red Led flashing
Green Led on
red Led flashing
No heating
(the induction component
under the pyroceram is too
hot)
Empty cooking protection triggered
it to cool down. The fan is
over 220˚C.
Call a technician.
Saucepan recognition not correctly
regulated.
Call a technician.
Weak heating
Small metal
objects heating
Make sure hot air is not being
sucked up. It should not
exceed 40˚C.
Validity from serial number 0550010246 02/2006
