Chapter 2: Front Panel Operation
52
2500A Series Operation Manual, 34172 Revision C, March 2008
nector. This setting determines whether the rising edge or falling edge of the pulse at the PULSE IN/PM
TRIG IN connector will trigger an RF pulse at the output. The available selections are as follows:
•
Rising Edge
•
Falling Edge
2.3.8
Language Menu Descriptions
The Language menus allow you to choose the language to be used by the instrument during remote oper-
ation. To access the Language menus, press the front panel LOCAL button while the instrument is in
local (front panel) operating mode:
NOTE:
Pressing the LOCAL button while the instrument is in the remote operating mode returns it to
local operating mode.
There are two Language menus associated with the LOCAL button.
2.3.8.1
Language Menu 1
The Language Menu 1 menu, as well as the Language Menu 2 menu, allow you to view and choose the
language to be used by the instrument during remote operation. Some of the remote language choices are
standard, and some are optional. The remote language that will be used by the instrument corresponds to
the Language menu item that is currently selected.
Figure 2-27 shows the Language Menu 1 menu:
Figure 2-27: Language Menu 1 with Interactive Softkeys
LANGUAGE MENU 1
SCPI
Language
2/3
GT900
GT12000
SCPI Selected
GT 9000
GT7000
Summary of Contents for 2508A
Page 1: ...2500A Series 2500A Series Microwave Synthesizer Operations Manual 34172 Revision C March 2008 ...
Page 4: ......
Page 22: ...Chapter 1 2500A Introduction 22 2500A Series Operation Manual 34172 Revision C March 2008 ...
Page 88: ...2500A Chapter 3 Remote Operation 88 2500A Series Operation Manual 34172 Revision C March 2008 ...