Mini400B Series Magnetic Swipe Reader
Mini400B
Track 1 & 2 & 3
MACHINE TYPE
FUNCTION
G
ET
VER 1.2
N
F - MEM
512 KB
1 2 3
MC
OFF
AUTO
OFF
Muti-Charge
RTC
REC QUEUE
LED STATUS
Li-Polymer
Rechargeable
FFM
2048
USB
Ver 1.1
BlueTooth
Bluetooth adaptor Installation Refer to page10
1. Insert batteries into your device properly, with the (+) and (-) terminals aligned correctly.
2. Always fully charge your batteries before use.
3. When you charge the batteries for the first time, or if the batteries have been stored for a
long time, it normally takes about 3 charge and discharge cycles for the batteries to regain
full capacity.
4. It is normal for batteries to become hot during charging and they will gradually cool down
to room temperature after fully charged.
5. Store the batteries in a cool and dry place.
6. Remove batteries from the electrical device if the device is not going to be used for a long
time.
7. Keep battery contact surfaces and battery compartment contacts clean by rubbing them
with a clean pencil eraser or a rough cloth each time you replace batteries.
8. If the performance of the batteries decrease substantially, it is time to replace the
batteries.
9. Keep batteries away from children. If swallowed, contact a physician at once.
Read the instructions on your device before
installing batteries
- 3 -
