13
j.
Clear Data:
Clear all data in the memory of GS1100.
k.
Battery Voltage:
Get battery voltage value of GS1100.
l.
Buzzer & Vibration:
Buzzer means the terminal sounds when reading a tag.
Vibration means the terminal vibrates when reading a tag. They can be set to
On/Off. If you want to set buzzer and vibration, the terminal must meet the following
two conditions: 1. Firmware version is V1.01R0 or above; 2. Hardware version is
REV. C or above. (To get firmware version, use [Get Version] function. To get
hardware version, see “MFG. NO” on the label at the back of the terminal.)
Configuration - [Miscellaneous] tab:
a.
Clearing the data of terminal:
If this
item is selected, GS1100‟s data will be
erased after the data is downloaded successfully.
b.
Updating the time of terminal:
If this item is selected,
GS1100‟s date / time will be
synchronized to PC‟s date / time after the data is downloaded successfully.
c.
Turning off the power of terminal:
If this item is selected, GS1100‟s power will be
turned off after the data is downloaded successfully.
d.
Saving/Appending the downloaded data to the specified file:
If this item is
selected, the download data will be saved to the specified file. Besides, if the
specified file exists, the new data will be appended in the end of existed data.
e.
Change Password:
Modify the software password. It will take effect on the next
