GIGA-BYTE TECHNOLOGY R281-3C0 User Manual Download Page 78

Page: 78 / 121

BIOS Setup

- 78 -

5-3-4-2 Memory RAS Configuration

Memory RAS Configuration Setup

RAS Type

Displays the RAS type.

Static Virtual Lockstep Mode

Enable/Disable the Static Virtual Lockstep mode.

Options available: Disable/Enable. Default setting is

Disable

Mirror Mode

Mirror Mode will set entire 1LM/2LM memory in system to be mirrored, consequently reducing the
memory capacity by half. Enables the Mirror Mode will disable the XPT Prefetch.

Options available: Disable/Mirror Mode 1LM/Mirror Mode 2LM. Default setting is

Disable

Memory Rank Sparing

Enable/Disable Memory Rank Sparing.

Options available: Disable/Enable. Default setting is

Disable

Correctable Error Threshold

Correctable Error Threshold (1-32767) used for sparing, tagging, and leaky bucket.

Press the <+> / <-> keys to increase or decrease the desired values.

SDDC Plus One

Enable/Disable SDDC Pluse One.

Options available: Disable/Enable. Default setting is

Disable

Summary of Contents for R281-3C0


























































































































Search results

Summary of Contents for R281-3C0

Reviews:

Related manuals for R281-3C0

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY R281-3C0, User Manual

Search results

Summary of Contents for R281-3C0

Reviews:

Related manuals for R281-3C0

Brands by name

Popular brands