GIGA-BYTE TECHNOLOGY R281-3C0 User Manual Download Page 65

Page: 65 / 121

- 65 -

BIOS Setup

5-2-12 USB Configuration

USB Configuration

USB Devices:

Displays the USB devices connected to the system.

XHCI Hand-off

Enable/Disable the XHCI (USB 3.0) Hand-off support.

Options available: Enabled/Disabled. Default setting is

Enabled

USB Mass Storage Driver Support

(Note)

Enable/Disable the USB Mass Storage Driver Support.

Options available: Enabled/Disabled. Default setting is

Enabled

Port 60/64 Emulation

Enables the I/O port 60h/64h emulation support. This should be enabled for the complete USB Keyboard
Legacy support for non-USB aware OS.

Options available: Enabled/Disabled. Default setting is

Enabled

(Note) This item is present only if you attach USB devices.

Summary of Contents for R281-3C0


























































































































Search results

Summary of Contents for R281-3C0

Reviews:

Related manuals for R281-3C0

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY R281-3C0, User Manual

Search results

Summary of Contents for R281-3C0

Reviews:

Related manuals for R281-3C0

Brands by name

Popular brands