GIGA-BYTE TECHNOLOGY R182-P91 User Manual Download Page 92

Page: 92 / 96

- 92 -

BIOS Setup

5-6 Boot Menu

The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error

message if the legacy drive(s) specified is not bootable.

Parameter

Description

Boot Configuration

Setup Prompt Timeout

Number of seconds to wait for setup activation key. 65535 (0xFFFF)

means indefinite waiting.

Press the numeric keys to input the desired values.

Bootup NumLock State

Enable/Disable the Bootup NumLock function.
Options available: On, Off. Default setting is

Quiet Boot

Enable/Disable showing the logo during POST.
Options available: Enabled, Disabled. Default setting is

Enabled

Dump full Setup Data

Press [Enter] to dump full setup data to file.

Dump non-default Setup Data

Press [Enter] to dump non-default setup data to file.

Restore Setup Data

Press [Enter] to restore setup data from file (cJson format).

New UEFI OS Boot Option
Policy

Controls the placement of newly detected UEFI boot options.
Options available: Default, Place First, Place Last. Default setting is

Place First

Summary of Contents for R182-P91

































































































Search results

Summary of Contents for R182-P91

Reviews:

Related manuals for R182-P91

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY R182-P91, User Manual

Search results

Summary of Contents for R182-P91

Reviews:

Related manuals for R182-P91

Brands by name

Popular brands