GIGA-BYTE TECHNOLOGY MZBSWAI Page 41 User Manual Download

Page: 41 / 44

- 41 -

BIOS Setup

System Mode

Display the System Mode state.

Secure Boot

Display the System Mode State.

Vendor Keys

Display the Vendor Keys information.

Secure Boot

Secure Boot requires all the applications that are running during the booting process to be pre-signed

with valid digital certificates. This way, the system knows all the files being loaded before Windows 8

loads and gets to the login screen have not been tampered with.

Options available: Enabled/Disabled. Default setting is

Disabled

Secure Boot Mode

(Note)

Define the Secure Boot Mode. Set this item to

Custom

to advanced items configuration.

Option available: Standard/Custom. Default setting is

Custom

Key Management

Press Enter to configure the advanced items.

2-4-1 Secure Boot menu

(Note) Advanced items prompt when this item is set to

Cutom

Summary of Contents for MZBSWAI













































Search results

Summary of Contents for MZBSWAI

Reviews:

Related manuals for MZBSWAI

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY MZBSWAI, User Manual

Search results

Summary of Contents for MZBSWAI

Reviews:

Related manuals for MZBSWAI

Brands by name

Popular brands