GIGA-BYTE TECHNOLOGY MX32-BS0 User Manual Download Page 59

Page: 59 / 82

- 59 -

BIOS Setup

2-3-1

Syetem Agent (SA) Configuration

Parameter

Description

Memory Configuration

Press [Enter] to configure advanced items.

Memory Frequency

– Displays the frequency inforamtion of installed memory.

Channel and slot information of memory DIMMs.

Maximum Memory Frequency

–

Configure the maxium memory frequency.

– Default setting is Auto.

Max TOLUD

– Maximum Value of TOLUD. Dynamic assignment would

adjust TOLUD automatically based on largest MMIO length

of installed graphic controller

– Options available: 1GB, 2GB, 3GB. Default setting is Auto.

VT-d

Enable/Disable Intel Virtualization Technology for Directed I/O (VT-d)
feature.
Options available: Enabled/DIsabled. Default setting is Enabled.

Above 4GB MMIO BIOS
assignment

Enable/Disable the Above 4G Memory Mapped IO BIOS Assignment.
Options available: Enabled/Disabled. Default setting is Disabled

X2APIC Opt Out

Enable/Disable X2APIC Opt Out function.
Options available: Enabled/Disabled. Default setting is Disabled

Summary of Contents for MX32-BS0



















































































Search results

Summary of Contents for MX32-BS0

Reviews:

Related manuals for MX32-BS0

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY MX32-BS0, User Manual

Search results

Summary of Contents for MX32-BS0

Reviews:

Related manuals for MX32-BS0

Brands by name

Popular brands