GIGA-BYTE TECHNOLOGY MX32-BS0 User Manual Download Page 33

Page: 33 / 82

- 33 -

BIOS Setup

2-2-1

CPU Configuration

Parameter

Description

CPU Configuration

Type / ID / Speed / L1 Data Cache /
L1 Instruction Cache / L2 Cache/ L3
Cache

Displays the technical specifications for the installed processor

Hardware Prefetcher

Enable/Disable CPU Hardware Prefetcher.

Options available: Enabled/Disabled. Default setting is Enabled.

Adjacent Cache Line Prefetch

Enable/Disable Adjacent Cache Line Prefetch.

Options available: Enabled/Disabled. Default setting is Enabled.

VT-x

Enable/Disable VT-x function.

Options available: Enabled/Disabled. Default setting is Enabled.

Active Processor Cores

To increase or decrease the number of active processor cores.
Options available: All, 1, 2, 3, 4, and 5. Defult setting is All.

Intel Trusted Execution Techonlogy

Enable/Disable Intel Trusted Execution Techonlogy.
Options available: Enabled/Disabled.

Default setting is Disabled.

Summary of Contents for MX32-BS0



















































































Search results

Summary of Contents for MX32-BS0

Reviews:

Related manuals for MX32-BS0

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY MX32-BS0, User Manual

Search results

Summary of Contents for MX32-BS0

Reviews:

Related manuals for MX32-BS0

Brands by name

Popular brands