GIGA-BYTE TECHNOLOGY H510M S2 User Manual Download Page 31

Page: 31 / 40

Media detect count

Allows you to set the number of times to check the presence of media. This item is configurable only when

Network Stack

is enabled. (Default: 1)

NVMe Configuration

Displays information on your PCIe SSD if installed.

SATA And RST Configuration

SATA Controller(s)

Enables or disables the integrated SATA controllers. (Default: Enabled)

SATA Mode Selection

Specifies the operating mode of the integrated SATA controllers.

AHCI

Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface

(AHCI) is an interface specification that allows the storage driver to enable advanced

Serial ATA features such as Native Command Queuing and hot plug. (Default)

Aggressive LPM Support

Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset

SATA controllers. (Default: Disabled)

Port 0/1/2/3

Enables or disables each SATA port. (Default: Enabled)

SATA Port 0/1/2/3 DevSlp

Allows you to determine whether to let the connected SATA device go into sleep mode. (Default: Disabled)

Hot plug

Enables or disable the hot plug capability for each SATA port. (Default: Disabled)

Configured as eSATA

Enables or disables support for external SATA devices.

Realtek PCIe GBE Family Controller

This sub-menu provides information on LAN configuration and related configuration options.

Miscellaneous

LEDs in System Power On State

Allows you to enable or disable motherboard LED lighting when the system is on.

Off

Disables the selected lighting mode when the system is on.

Enables the selected lighting mode when the system is on. (Default)

Intel Platform Trust Technology (PTT)

Enables or disables Intel

PTT Technology. (Default: Disabled)

3DMark01 Enhancement

Allows you to determine whether to enhance some legacy benchmark performance. (Default: Disabled)

CPU PCIe Link Speed

Allows you to set the operation mode of the CPU-controlled PCI Express slots to Gen 1, Gen 2, Gen 3, or

Gen 4

(Note)

. Actual operation mode is subject to the hardware specification of each slot.

Auto

lets the BIOS

automatically configure this setting. (Default: Auto)

PCH PCIe Link Speed

Allows you to set the operation mode of the Chipset-controlled PCI Express slots to Gen 1, Gen 2, or

Gen 3. Actual operation mode is subject to the hardware specification of each slot.

Auto

lets the BIOS

automatically configure this setting. (Default: Auto)

- 31 -

Summary of Contents for H510M S2









































Search results

Summary of Contents for H510M S2

Reviews:

Related manuals for H510M S2

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY H510M S2, User Manual

Search results

Summary of Contents for H510M S2

Reviews:

Related manuals for H510M S2

Brands by name

Popular brands