GIGA-BYTE TECHNOLOGY H510M S2 User Manual Download Page 26

Page: 26 / 40

DRAM Power Limit (Watts) / DRAM Power Limit Time

Allows you to set the power limit for memory Turbo mode and how long it takes to operate at the specified

power limit.

Auto

lets the BIOS automatically configure this setting. This item is configurable only when

Turbo Power Limits

is set to

Enabled

. (Default: Auto)

Core Current Limit (Amps)

Allows you to set a current limit for CPU Turbo mode. When the CPU current exceeds the specified current

limit, the CPU will automatically reduce the core frequency in order to reduce the current.

Auto

sets the

power limit according to the CPU specifications. This item is configurable only when

Turbo Power Limits

is set to

Enabled

. (Default: Auto)

Turbo Per Core Limit Control

(Note 1)

Allows you to control each CPU core limit separately. (Default: Auto)

Extreme Memory Profile (X.M.P.)

(Note 2)

Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when

enabled.

Disabled

Disables this function. (Default)

Profile1

Uses Profile 1 settings.

Profile2

(Note 2)

Uses Profile 2 settings.

System Memory Multiplier

Allows you to set the system memory multiplier.

Auto

sets memory multiplier according to memory SPD

data. (Default: Auto)

Memory Ref Clock

Allows you to manually adjust the memory reference clock. (Default: Auto)

Memory Odd Ratio (100/133 or 200/266)

Enabled

allows Qclk to run in odd frequency. (Default: Auto)

Gear Mode

(Note 2)

Allows you to improve the maximum OC frequency potential. (Default: Auto)

Advanced Memory Settings

Memory Multiplier Tweaker

Provides different levels of memory auto-tuning. (Default: Auto)

Channel Interleaving

Enables or disables memory channel interleaving.

Enabled

allows the system to simultaneously access

different channels of the memory to increase memory performance and stability.

Auto

lets the BIOS

automatically configure this setting. (Default: Auto)

Rank Interleaving

Enables or disables memory rank interleaving.

Enabled

allows the system to simultaneously access different

ranks of the memory to increase memory performance and stability.

Auto

lets the BIOS automatically

configure this setting. (Default: Auto)

(Note 1) This item is present only when you install a CPU that supports this feature. For more information about

Intel

CPUs' unique features, please visit Intel's website.

(Note 2) This item is present only when you install a CPU and a memory module that support this feature.

- 26 -

Summary of Contents for H510M S2









































Search results

Summary of Contents for H510M S2

Reviews:

Related manuals for H510M S2

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY H510M S2, User Manual

Search results

Summary of Contents for H510M S2

Reviews:

Related manuals for H510M S2

Brands by name

Popular brands