manualshive.com logo in svg

GIGA-BYTE TECHNOLOGY H310N 2.0, User Manual

Share
Download
GIGA-BYTE TECHNOLOGY H310N 2.0 User Manual Download Page 33

 

`

NVMe Configuration

 

Displays information on your M.2 NVME PCIe SSD if installed.

 

`

SATA And RST Configuration

 

&

SATA Controller(s)

 

Enables or disables the integrated SATA controllers. (Default: Enabled)

 

&

SATA Mode Selection

 

Specifies the operating mode of the integrated SATA controllers.

 

AHCI   

 

 Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface 

(AHCI) is an interface specification that allows the storage driver to enable advanced 

Serial ATA features such as Native Command Queuing and hot plug. (Default)

 

&

Aggressive LPM Support

 

Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset 

SATA controllers. (Default: Disabled)

 

&

Port 0/1/2/3

 

Enables or disables each SATA port. (Default: Enabled)

 

&

Hot plug

 

Enables or disable the hot plug capability for each SATA port. (Default: Disabled)

 

&

Configured as eSATA

 

Enables or disables support for external SATA devices.

 

&

Mechanical Presence Switch

 

Allows you to determine whether to turn on the Mechanical Presence switch for the SATA device. This item 

is configurable only when 

Hot plug

 is enabled. (Default: Enabled)

- 33 -

Summary of Contents for H310N 2.0









































Reviews:

No comments

Brands by name

Popular brands

Load more brands