GIGA-BYTE TECHNOLOGY H261-3C0 Service Manual Download Page 79

Page: 79 / 120

- 79 -

BIOS Setup

5-3-5-1 Intel® VT for Directed I/O (VT-d)

Intel® VT for Directed I/O (VT-d)
Intel® VT for Directed I/O (VT-d)

Enable/Disable the Intel VT for Directed I/O (VT-d) support function by reporting the I/O device
assignment to VMM through DMAR ACPI Tables.

Options available: Enable/Disable. Default setting is

Enable

ACS Control

Enable: Programs ACS only to Chipset Pcie Root Ports Bridges.

Disable: Programs ACS to all PCIe bridges.

Default setting is

Enable

Interrupt Remapping

Enable/Disable the interrupt remapping support function.

Options available: Enable/Disable. Default setting is

Enable

PassThrough DMA

Enable/Disable the Non-Isoch VT_D Engine PassThrough DMA support function.

Options available: Enable/Disable. Default setting is

Enable

ATS

Enable/Disable Non-Isoch VT_D Engine ATS support.

Options available: Enable/Disable. Default setting is

Enable

Posted Interrupt

Enable/Disable VT_D posted interrupt.

Options available: Enable/Disable. Default setting is

Enable

Coherency Suuport (Non-Isoch)

Enable/Disable Non-Isoch VT_D Engine Coherency support.

Options available: Enable/Disable. Default setting is

Enable

Summary of Contents for H261-3C0

























































































































Search results

Summary of Contents for H261-3C0

Reviews:

Related manuals for H261-3C0

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY H261-3C0, Service Manual

Search results

Summary of Contents for H261-3C0

Reviews:

Related manuals for H261-3C0

Brands by name

Popular brands