GIGA-BYTE TECHNOLOGY GA-H97-HD3 User Manual Download Page 7

Page: 7 / 40

- 7 -

1-2 Product Speciications

Only for GA-Z97-HD3.

Only for GA-H97-HD3.

CPU

Support for Intel

Core

™

i7 processors/Intel

Core

™

i5 processors/

Intel

Core

™

i3 processors/Intel

Pentium

processors/

Intel

Celeron

processors in the LGA1150 package

(Go to GIGABYTE's website for the latest CPU support list.)

L3 cache varies with CPU

Chipset

Intel

Z97

/H97

Express Chipset

Memory

4 x DDR3 DIMM sockets supporting up to 32 GB of system memory

* Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical

memory is installed, the actual memory size displayed will be less than the size of

the physical memory installed.

Dual channel memory architecture

Support for DDR3 1600/1333 MHz memory modules

Support for non-ECC memory modules

Support for Extreme Memory Proile (XMP) memory modules

(Go to GIGABYTE's website for the latest supported memory speeds and memory

modules.)

Onboard
Graphics

Integrated Graphics Processor:

- 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60Hz

- 1 x DVI-D port, supporting a maximum resolution of 1920x1200@60Hz

* The DVI-D port does not support D-Sub connection by adapter.

- 1 x HDMI port, supporting a maximum resolution of 4096x2160@24Hz or

2560x1600@60Hz

* Support for HDMI 1.4a version.

Support for up to three displays at the same time

Maximum shared memory of 1 GB

Audio

Realtek

ALC887 codec

High Deinition Audio

2/4/5.1/7.1-channel

Support for S/PDIF Out

LAN

Realtek

GbE LAN chip (10/100/1000 Mbit)

Expansion Slots

1 x PCI Express x16 slot, running at x16 (PCIEX16)

(The PCIEX16 slot conforms to PCI Express 3.0 standard.)

* For optimum performance, if only one PCI Express graphics card is to be installed,

be sure to install it in the PCIEX16 slot.

1 x PCI Express x16 slot, running at x4 (PCIEX4)

* The PCIEX4 slot shares bandwidth with the PCI Express x1 slots. The PCI Express

x1 slots will become unavailable when a PCIe x4 expansion card is installed.

* When installing a x8 or above card in the PCIEX4 slot, make sure to set PCIE Slot

Coniguration (PCH) in BIOS Setup to x4.

2 x PCI Express x1 slots

(The PCIEX4 and PCI Express x1 slots conform to PCI Express 2.0 standard.)

2 x PCI slots

Multi-Graphics
Technology

Support for 2-Way AMD CrossFire

™

technology

Summary of Contents for GA-H97-HD3









































Search results

Summary of Contents for GA-H97-HD3

Reviews:

Related manuals for GA-H97-HD3

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY GA-H97-HD3, User Manual

Search results

Summary of Contents for GA-H97-HD3

Reviews:

Related manuals for GA-H97-HD3

Brands by name

Popular brands