GIGA-BYTE TECHNOLOGY GA-H97-HD3, User Manual

Page: 28 / 40

- 28 -
&
Intel Processor Graphics
Enables or disables the onboard graphics function. (Default: Enabled)
&
Intel Processor Graphics Memory Allocation
Allows you to set the onboard graphics memory size. Options are: 32M~1024M. (Default: 64M)
&
DVMT Total Memory Size
Allows you to allocate the DVMT memory size of the onboard graphics. Options are: 128M, 256M, MAX.
(Default: MAX)
&
Intel(R) Rapid Start Technology
Enables or disables Intel ®
Rapid Start Technology. (Default: Disabled)
&
Legacy USB Support
Allows USB keyboard/mouse to be used in MS-DOS. (Default: Enabled)
&
XHCI Hand-off
Determines whether to enable XHCI Hand-off feature for an operating system without XHCI Hand-off
support. (Default: Enabled)
&
EHCI Hand-off
Determines whether to enable EHCI Hand-off feature for an operating system without EHCI Hand-off
support. (Default: Disabled)
&
USB Storage Devices
Displays a list of connected USB mass storage devices. This item appears only when a USB storage device
is installed.
&
Two Layer KVM Switch
Set to Enabled
to ensure proper device functionality when chaining two KVM switches. (Default: Disabled)
&
OnBoard LAN Controller
Enables or disables the onboard LAN function.
If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to
Disabled .
&
PCIE Slot Coniguration (PCH)
Speciies the operating bandwidth for the PCIEX4 slot.
Auto Lets the BIOS automatically conigure this setting depending on the expansion card being installed.
(Default)
x1 PCIEX4 operates at x1 mode.
x4 PCIEX4 operates at x4 mode. The PCIEX1_1 and PCIEX1_2 slots will become unavailable.
`
SATA Coniguration
&
Integrated SATA Controller
Enables or disables the integrated SATA controllers. (Default: Enabled)
&
SATA Mode Selection
Enables or disables RAID for the SATA controllers integrated in the Chipset or conigures the SATA controllers
to AHCI mode.
IDE Conigures the SATA controller to IDE mode.
RAID Enables RAID for the SATA controller.
AHCI Conigures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface speciication that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
`
Serial ATA Port 0/1/2/3/4/5
&
Port 0/1/2/3/4/5
Enables or disables each SATA port. (Default: Enabled)