GIGA-BYTE TECHNOLOGY GA-H110M-D3H User Manual Download Page 32

Page: 32 / 37

Power On Password

Set the password when

Power On By Keyboard

is set to

Password

Press <Enter> on this item and set a password with up to 5 characters and then press <Enter> to accept.

To turn on the system, enter the password and press <Enter>.

Note: To cancel the password, press <Enter> on this item. When prompted for the password, press <Enter>

again without entering the password to clear the password settings.

Power On By Mouse

Allows the system to be turned on by a PS/2 mouse wake-up event.

Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.

Disabled

Disables this function. (Default)

Move

Move the mouse to turn on the system.

Double Click

Double click on left button on the mouse to turn on the system.

ErP

Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled)

Note: When this item is set to

Enabled

, the following functions will become unavailable: Resume by Alarm,

PME event wake up, power on by mouse, power on by keyboard, and wake on LAN.

Soft-Off by PWR-BTTN

Configures the way to turn off the computer in MS-DOS mode using the power button.

Instant-Off

Press the power button and then the system will be turned off instantly. (Default)

Delay 4 Sec. Press and hold the power button for 4 seconds to turn off the system. If the power

button is pressed for less than 4 seconds, the system will enter suspend mode.

Power Loading

Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing

it to shutdown or fail. If this occurs, please set to

Enabled

Auto

lets the BIOS automatically configure this

setting. (Default: Auto)

Resume by Alarm

Determines whether to power on the system at a desired time. (Default: Disabled)

If enabled, set the date and time as following:

Wake up day: Turn on the system at a specific time on each day or on a specific day in a month.

Wake up hour/minute/second: Set the time at which the system will be powered on automatically.

Note: When using this function, avoid inadequate shutdown from the operating system or removal of the

AC power, or the settings may not be effective.

RC6(Render Standby)

Allows you to determine whether to let the onboard graphics enter standby mode to decrease power

consumption. (Default: Enabled)

- 32 -

Summary of Contents for GA-H110M-D3H






































Search results

Summary of Contents for GA-H110M-D3H

Reviews:

Related manuals for GA-H110M-D3H

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY GA-H110M-D3H, User Manual

Search results

Summary of Contents for GA-H110M-D3H

Reviews:

Related manuals for GA-H110M-D3H

Brands by name

Popular brands