GIGA-BYTE TECHNOLOGY G591-HS0 User Manual Download

Page: 59 / 113

BIOS Setup

- 59 -

5-2-6

USB Configuration

(Note) This item is present only if you attach USB devices.

Parameter

Description

USB Configuration

USB Devices:

Displays the USB devices connected to the system.

XHCI Hand-off

Enable/Disable the XHCI (USB 3.0) Hand-off support.
Options available: Enabled/Disabled. Default setting is

Enabled

XHCI Hand-off

Enable/Disable the XHCI (USB 3.0) Hand-off support.
Options available: Enabled/Disabled. Default setting is

Enabled

USB Mass Storage Driver
Support

(Note)

Enable/Disable the USB Mass Storage Driver Support.
Options available: Enabled/Disabled. Default setting is

Enabled

Port 60/64 Emulation

Enables the I/O port 60h/64h emulation support. This should be
enabled for the complete USB Keyboard Legacy support for non-
USB aware OS.
Options available: Enabled/Disabled. Default setting is

Enabled

Summary of Contents for G591-HS0


















































































































Search results

Summary of Contents for G591-HS0

Reviews:

Related manuals for G591-HS0

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY G591-HS0, User Manual

Search results

Summary of Contents for G591-HS0

Reviews:

Related manuals for G591-HS0

Brands by name

Popular brands