GIGA-BYTE TECHNOLOGY G292-Z20 User Manual Download Page 109

Page: 109 / 142

- 109 -

BIOS Setup

5-6 Server Management Menu

(Note) Advanced items prompt when

OS Watchdog Timer

is set to

Enabled

Parameter

Description

FRB-2 Timer

Enable/Disable FRB-2 timer (POST timer).
Options available: Enabled/Disabled. Default setting is

Disabled

FRB-2 Timer
timeout

Configure the FRB2 Timer timeout.

Options available: 3 minutes/4 minutes/5 minutes/6 minutes. Default setting is

minutes

Please note that this item is configurable when FRB-2 Timer is set to Enabled.

FRB-2 Timer Policy

Configure the FRB2 Timer policy.

Options available: Do Nothing/Reset/Power Down. Default setting is

Do Nothing

Please note that this item is configurable when FRB-2 Timer is set to Enabled.

OS Watchdog
Timer

Enable/Disable OS Watchdog Timer function.
Options available: Enabled/Disabled. Default setting is

Disabled

OS Wtd Timer
Timeout

(Note)

Configure OS Watchdog Timer.

Options available: 5 minutes/10 minutes/15 minutes/20 minutes. Default setting is

minutes

Please note that this item is configurable when OS Watchdog Timer is set to

Enabled.

OS Wtd Timer
Policy

(Note)

Configure OS Watchdog Timer Policy.

Options available: Reset/Do Nothing/Power Down. Default setting is

Reset

Please note that this item is configurable when OS Watchdog Timer is set to

Enabled.

Summary of Contents for G292-Z20















































































































































Search results

Summary of Contents for G292-Z20

Reviews:

Related manuals for G292-Z20

Brands by name

Popular brands

GIGA-BYTE TECHNOLOGY G292-Z20, User Manual

Search results

Summary of Contents for G292-Z20

Reviews:

Related manuals for G292-Z20

Brands by name

Popular brands