- 17 -
Hardware Installation
•
A RAID 0 or RAID 1 configuration requires at least two hard drives. If more than two hard drives
are configured, the total number of hard drives must be an even number.
•
A RAID 10 configuration requires four hard drives.
(Note) When a RAID configuration is built across the SATA 6Gb/s channels, the system performance of
the RAID configuration may vary depends on the devices are connected.
7
1
DEBUG
PORT
G.QBOFM
9) SATA2/SATA3/SATA0/SATA1
(SATA 6Gb/s Connectors/SATA3 Support SATA DOM Function)
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and
1.5Gb/s standard. Each SATA connector supports a single SATA device.
Please see page 22 for SATA DOM jumper setting.
SATA2
SATA3
SATA1
Pin No. Definition
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
GND
Normal Mode
:
Pin No. Definition
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
P5V
SATA DOM Mode
:
SATA0
10) IPMB (IPMB Connector)
Pin No. Definition
1
Clock
2
GND
3
Data
1
3
