Giga-Byte Communications GA-Z270X-Gaming 7 Page 60 User Manual Download

Page: 60 / 136

BIOS Setup

- 60 -

2-6 Peripherals

Initial Display Output

Specifies the first initiation of the monitor display from the installed PCI Express graphics card or the onboard

graphics.

IGFX

Sets the onboard graphics as the first display.

PCIe 1 Slot

Sets the graphics card on the PCIEX16 slot as the first display. (Default)

PCIe 2 Slot

Sets the graphics card on the PCIEX8 slot as the first display.

PCIe 3 Slot

Sets the graphics card on the PCIEX4 slot as the first display.

OnBoard LAN Controller (Rivet Networks Killer

™

E2500 LAN Chip, LAN2)

Enables or disables the

Rivet Networks Killer

™

E2500

LAN function. (Default: Enabled)

If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to

Disabled

EZ RAID

Allows you to quickly set up a RAID array. Refer to Chapter 3, "Configuring a RAID Set," for instructions

on configuring a RAID array.

LED_C Connect

Enables or disables the lights of the RGB (RGBW) LED strip connected to the LED_C header on the

motherboard. (Default: Enabled)

RGB Fusion

Allows you to set the LED lighting mode for the motherboard.

Off

Disables this function.

Pulse Mode

All LEDs simultaneously fade in and fade out.

Color Cycle

All LEDs simultaneously cycle through a full spectrum of colors.

Static Mode

All LEDs emit a single color.

(Default)

Flash Mode

All LEDs simultaneously flash on and off.

Intel Platform Trust Technology (PTT)

Enables or disables Intel

PTT Technology. (Default: Disabled)

Summary of Contents for GA-Z270X-Gaming 7









































































































































Search results

Summary of Contents for GA-Z270X-Gaming 7

Reviews:

Related manuals for GA-Z270X-Gaming 7

Brands by name

Popular brands

Giga-Byte Communications GA-Z270X-Gaming 7, User Manual

Search results

Summary of Contents for GA-Z270X-Gaming 7

Reviews:

Related manuals for GA-Z270X-Gaming 7

Brands by name

Popular brands