Giga-Byte Communications GA-Z270X-Gaming 7 Page 88 User Manual Download

Page: 88 / 136

Unique Features

- 88 -

Select

Q-Flash

to access Q-Flash

B. Updating the BIOS

In the main menu of Q-Flash, use the keyboard or mouse to select an item to execute. When updating the BIOS,

choose the location where the BIOS file is saved. The following procedure assumes that you have saved the
BIOS file to a USB flash drive.

Step 1:

1. Insert the USB flash drive containing the BIOS file into the computer. In the main screen of Q-Flash, select

Update BIOS

•

The

Save BIOS

option allows you to save the current BIOS file.

•

Q-Flash only supports USB flash drive or hard drives using FAT32/16/12 file system.

•

If the BIOS update file is saved to a hard drive in RAID/AHCI mode or a hard drive attached

to an independent SATA controller, use the <End> key during the POST to access Q-Flash.

2. Select the BIOS update file.

Make sure the BIOS update file matches your motherboard model.

Summary of Contents for GA-Z270X-Gaming 7









































































































































Search results

Summary of Contents for GA-Z270X-Gaming 7

Reviews:

Related manuals for GA-Z270X-Gaming 7

Brands by name

Popular brands

Giga-Byte Communications GA-Z270X-Gaming 7, User Manual

Search results

Summary of Contents for GA-Z270X-Gaming 7

Reviews:

Related manuals for GA-Z270X-Gaming 7

Brands by name

Popular brands