LaneLED INOX42
Page 8 / 17
Created
22.03.2017
roen
Modified
11.07.2018
roen
Object-ID
1181162
5 Installation of LaneLED light bars
5.1 Mounting the adapter to the LED carrier profile
-
Mount the adapter in the groove as shown in the
drawing
Note
In every case, an adapter should be installed at each
end of a LaneLED light bar. The distance between two
adapters on one light bar should be a maximum of 30
cm.
For the installation of the adapter, an M5 threaded hole
has to be drilled
-
Drill D=4.2
-
Thread cutter M5
5.2 Fitting the system cable
-
Loop the system cable through the handrail
supports
5.3 Supply line connection
-
Connect the connection cable and system cable
with the press or solder connector
