X Series Guitar input:
Plug the X Series Guitar output into this jack using the
supplied stereo (TRS) 1/4” cable.
The plugs used with a stereo cable have tip, ring, and sleeve (TRS) connections.
Status LED:
Green
indicates that the G-Node recognizes the guitar. Yellow indicates
the guitar is either not plugged in, not turned on, or not functioning properly.
SD card slot and recorder controls:
Reserved for future expansion.
String activity LEDs:
These indicate which strings are outputting a signal.
Headphone jack:
Plug standard, 1/8” stereo headphones into this jack.
Headphone level control:
This adjusts the headphone level, but not the level of the
rear-panel outputs.
Bluetooth antenna:
Reserved for future expansion.
G-Node Rear Panel
G-Node Rear Panel
Page
10
