VPC6600 Series Vehicle PC Operation Manual A.2
57
Appendix A: System Recovery
VPC6600 has equipped with a recovery system scheme for returning the whole unit
back to original factory default settings, in case of the system is malfunctioning.
Please follow below steps carefully to perform this action.
NOTE
Please have a USB keyboard connected ready before starting this
system recovery scheme.
Step 1:
Press any key to hold up below screen while the system is booting up (this will
only remain less than 2seconds during booting up sequence). Use arrow key to
select “
WinPE Recovery
” and follow by
Enter
to confirm.
Step 2:
Below screenshots will appear for initial inspection process after selected “
WinPE
Recovery
”.
GRUB4DOS 0.4.4 2009-03-24, Memory: 639K / 1014M, MenuEnd: 0x4B828
1
Use the
and keys to highlight an entry. Press ENTER or “b” to boot.
Press “e” to edit the commands before booting, or “c” for a command-line.
Windows XP Embedded SP3
WinPE Recovery
