14
VPC3000 Series Vehicle PC Installation Manual ver A.1
Connector B
1.
Line
Input
The VPC 3000 series provide all major audio signals and it can be optional with
Line-in/Line-out/Speaker-out function.
This is part of hardware specification for audio line in.
2. Microphone
Input
The VPC 3000 series provide all major audio signals and it can be optional with
Line-in/Line-out/Speaker-out function.
This is part of hardware specification for audio microphone in.
3. USB Connectors
The unit provides 3 x USB (Universal Serial Bus) ports. This gives a complete Plug and
Play, and hot attach/detach for up to 127 external devices. The USB interfaces comply
with USB specification Rev. 2.0 which supports 480Mbps transfer rate, and are fuse
protected. The adapter cable has a 4 x 2-pin connector on one end and a USB connector
on the other. The USB interfaces can be disabling from the system BIOS setup.
VPC3000 Series Vehicle PC Installation Manual ver.A.1
15
Chapter 3
Chipset Software Installation Utility
3.1
Announcement
Please pay attention and read the instruction in this chapter very carefully before you are
attempting to do any installation in order to enhanced display device drivers and utility
software. The device drivers for the VPC3000 series board are located in the software
installation CD. The driver CD will guide and link you to the utilities and device drivers
under a
Windows system
. The Intel® Chipset Software Installation Utility is not
required on any system running Windows XP. Updates are provided via Service Packs
from Microsoft.
The files on the software installation CD are compressed. DO NOT
attempt to install the drivers by copying the files manually. You MUST
use the supplied SETUP program to install the drivers.
Before you are going to perform installation, it is very IMPORTANT to note that most
display drivers need to have the relevant software application installed in the system
before installing the enhanced display drivers. Additionally, many of the installation
procedures will assume that you are familiar with both the relevant software applications
and operating system commands. Please review the relevant operating system
commands and the applicable sections of your application software’s user manual before
starting the installation.
