34
VPC3000 Series Vehicle PC Installation Manual ver A.1
If you intend to change the CMOS setting without restoring the
previous backup, you will have to click on “DEL” within two
seconds of the “COMS checksum error…” display screen message
appearing. Then enter the “Setup” screen to modify the data. If
the “COMS checksum error…” message keeps appearing again
and again, please check to see if you might need to replace the
battery in your system.
Figure 6.1.2: Award BIOS Initial Setup Screen
VPC3000 Series Vehicle PC Installation Manual ver.A.1
35
6.2 Entering
Setup
The BIOS setup program can be accessed by pressing the <DEL> key during POST.
6.2.1. Standard CMOS Setup
Figure 6.2.1: Award BIOS Initial Setup Screen
Choose the “Standard CMOS Features” option from the BIOS Initial Setup Screen, and
the screen below will be displayed. This menu allows users to configure system
components such as date, time, hard disk drive, display, and memory.
Press “ESC” to allow you to return back to BIOS Initial Setup Screen.
Figure 6.2.2: Standard CMOS features screen
