Giantec tracer2000, Hardware User Manual

Page: 35 / 39

tracer2000 Network DVR Hardware User’s Manual
Version 3.1 Page 27 of 31
2.8 Frequency / Voltage Control
Use this menu to specify your settings for frequency / voltage control.
Auto Detect DIMM / PCI CLK Enabled Item Help
Spread Spectrum Disabled Menu Level
¾
↑↓←→ Move
F10: Save
F5: Previous Values
Enter: Select
ESC: Exit
F6: Fail-safe Defaults +/-/PU/PD: Value
F1: General Help
F7: Optimized Defaults
2.9 Load Optimized Defaults
Use this menu to load the BIOS default values that are factory settings for
optimal performance system operations. While Award has designed the
custom BIOS to maximize performance, the factory has the right to change
these defaults to meet their needs.
Load Optimized Defaults (Y/N)? N
Pressing “Y” loads the default values that are factory settings for optimal
performance system operations.
2.10 Supervisor / User Password
Use this menu to set User and Supervisor Passwords.
2.11 Save & Exit Setup
Save CMOS value changes to CMOS and exit setup.
2.12 Exit Without Save
Abandon all CMOS value changes and exit setup.