tracer2000 Network DVR Hardware User’s Manual
Version 3.1
Page 24 of 31
2.4
Integrated Peripherals
Use this menu to specify your setting for integrated peripherals.
OnChip Primary PCI IDE
Enabled
Item Help
OnChip Secondary PCI IDE
Enabled
IDE Primary Master PIO
Auto
Menu Level
¾
IDE Primary Slave PIO
Auto
IDE Secondary Master PIO
Auto
IDE Secondary Slave PIO
Auto
IDE Primary Master UDMA
Auto
IDE Primary Slave UDMA
Auto
IDE Secondary Master UDMA
Auto
IDE Secondary Slave UDMA
Auto
USB Controller
Enabled
USB Keyboard Support
Enabled
USB Mouse Support
Disabled
Init Display
Onboard / AGP
AC97 Audio
Auto
IDE HDD Block Mode
Enabled
Power On Function
Button Only
xKB Power On Password
Enter
xHot Key Power On
Ctrl-F1
Onboard Serial Port 1
3F8 / IRQ4
Onboard Serial Port 2
2F8 / IRQ3
UART Mode Select
Normal
xRxD, TxD Active
Hi, Lo
xIR Transmission Delay
Enabled
xUR2 Duplex Mode
Half
xUse IR Pins
IR-Rx2Tx2
Onboard Parallel Port
378 / IRQ7
Parallel Port Mode
SPP
EPP Mode Select
EPP1.7
ECP Mode Use DMA
3
PWRON After PWR-Fail
Off
Watch Dog Timer Select
Disable
If your IDE hard drive supports
block mode select Enabled for
automatic detection of the optimal
number of block read / write per
sector the drive can support.
↑↓←→
Move
F10: Save
F5: Previous Values
Enter: Select
ESC: Exit
F6: Fail-safe Defaults
+/-/PU/PD: Value
F1: General Help
F7: Optimized Defaults
Summary of Contents for tracer2000
Page 1: ...tracer2000 Network Digital Video Recorder Hardware User s Manual ...
Page 2: ......
Page 4: ......
Page 6: ......
