background image

GIANT INDUSTRIES, INC.

 

900 N. Westwood Ave., Toledo, Ohio  43607              

Phone: (419)-531-4600  FAX (419)-531-6836

www.giantpumps.com

 Copyright 2022 Giant Industries, Inc.

11/22   GP7522GB.INDD 

GIANT INDUSTRIES LIMITED WARRANTY

Giant Industries, Inc. pumps and accessories are warranted by the manufacturer to be free from 

defects in workmanship and material as follows:

 

1.   Five (5) years from the date of shipment for all pumps used in portable pressure  

 

 

washers with NON-SALINE, clean water applications.

 

2.   Two (2) years from the date of shipment for Giant pumps used in car wash    

 

 applications.

 

3.   One (1) year from the date of shipment for all other Giant industrial and  

 

 

 

consumer pumps.

 

4.   Six (6) months from the date of shipment for all rebuilt pumps

 

5.   Ninety (90) days from the date of shipment for all Giant accessories.

                   

This warranty is limited to repair or replacement of pumps and accessories of which the  

manufacturer’s evaluation shows were defective at the time of shipment by the manufacturer.  The 

following items are NOT covered or will void the warranty:

 

1.   Defects caused by negligence or fault of the buyer or third party.

 

2.   Normal wear and tear to standard wear parts.

 

3.   Use of repair parts other than those manufactured or authorized by Giant.

 

4.   Improper use of the product as a component part.

 

5.   Changes or modifications made by the customer or third party.

 

6.   The operation of pumps and or accessories exceeding the specifications set forth  

 

 

in the Operations Manuals provided by Giant Industries, Inc.

Liability under this warranty is on all non-wear parts and limited to the replacement or repair of 

those products returned freight prepaid to Giant Industries which are deemed to be defective 

due to workmanship or failure of material.  A Returned Goods Authorization (R.G.A.) number and 

completed warranty evaluation form is required prior to the return to Giant Industries of all products 

under warranty consideration.  Call (419)-531-4600 or fax (419)-531-6836 to obtain an R.G.A. 

number.

Repair or replacement of defective products as provided is the sole and exclusive remedy provided 

hereunder and the MANUFACTURER SHALL NOT BE LIABLE FOR FURTHER LOSS, DAMAGES, 

OR EXPENSES, INCLUDING INCIDENTAL AND CONSEQUENTIAL DAMAGES DIRECTLY OR 

INDIRECTLY ARISING FROM THE SALE OR USE OF THIS PRODUCT.

THE LIMITED WARRANTY SET FORTH HEREIN IS IN LIEU OF ALL OTHER WARRANTIES 

OR REPRESENTATION, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY 

WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE 

AND ALL SUCH WARRANTIES ARE HEREBY DISCLAIMED AND EXCLUDED BY THE 

MANUFACTURER.

  

 

WARNING:

 This product might contain a chemical known to the State of California to cause  

            cancer, and birth defects or other reproductive harm. 

            For more information go to www.P65Warnings.ca.gov

  

  

Summary of Contents for GP7522GB













Reviews: