03
Getting Started
1.0 General Use of the Jet Washer:
1. Firstly ensure that the power switch is depressed in the “Off”
position to ensure the washer unit is switched off.
2. Connect the spray lance and the water source pipe to the washer
unit.
3. Connect the water source pipe to your indoor or outdoor tap.
4. Connect your washer to the mains power, using the power plug.
[Important] The plug must only be connected to an indoor socket
protected by an RCD circuit breaker.
5. To turn on the washer depress the “On” button on the washer.
6. To begin sraying pull the trigger on the jet wash lance.
7. When using the washer if you wish to change the power of water
jet twist the end of the spray gun nozzel to achieve desired water
jet power.
8. When you have finished using the jet wash ensure that you have
disconnected the plug from the mains supply before preparing the
unit for storage.
