C. Warning and safety
1) Read the manual before connecting this inverter and keep it for future reference.
2) Don't put the inverter under sunlight, near a heating source, wet or humid
environment.
3) The case housing of inverter will be hot while using. Do not allow flammable
materials to contact the inverter, such as clothing, sleeping bags, carpet or any
other flammable materials. The heat from the inverter can damage these items.
4) The power inverter is designed to be used with a negative ground electrical
system! Don't use with positive ground electrical systems (the majority of modern
automobiles, RVs, trucks and boats are negative ground).
5) Do not disassemble the unit: it may cause fire or electric shock.
6) This device should only be serviced by a qualified technician. This item does not
have any serviceable parts.
7) Prevent body contact with grounded surfaces such as pipes, radiators, ranges,
and refrigerator enclosures during installation.
8) Do not operate the inverter if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgement or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the inverter.
9) People with pacemakers should consult their physician(s) before using this
product. Electromagnetic fields in close proximity to a pacemaker could cause
interference to or failure of the pacemaker.
10) Keep the inverter well-ventilated. Do not place any objects on top of or next to the
inverter or allow anything to cover the cooling fans; doing so can cause the
inverter to overheat, causing a potential fire hazard and/or damage to the inverter.
Leave adequate ventilation space underneath the inverter as well; thick carpets
or rugs can obstruct air flow, causing the inverter to overheat.
11) Avoid unintentional starting. Be sure the switch is in the OFF position when not in
use and before plugging in any appliance.
12) Keep inverter away from children. Don't install the inverter where it is accessible to
children.
13) The power inverter will output the same AC power as utility power, please treat the
AC outlets as carefully as you would your home AC outlets. Do not put anything
other than an electrical appliance into the output terminal. It may cause shock or
fire.
14) Disconnect the battery and inverter when not in use.
Note:
Performance of this unit may vary depending on the available battery power or
appliance wattage.
Warning:
The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which cannot
be built into this product, but must be supplied by operator. Guard against electric
shock. Do not open the metal case; risk of electric shock.
1
2
SPECIFICATIONS
A. INSTRUCTION
The GIANDEL Power inverter product line is used for back-up power. The pure sine
product line is ideal for sensitive equipment and provides clean power, which is more
efficient for back-up power applications. It converts DC (direct current/car battery)
power into AC (alternating current) power that can be used for running a wide variety
of tools and appliances under rating power. This inverter is perfect for providing
mobile power in cars, boats and work trucks. The inverter can also be utilized as a
back-up source of electricity in the event of an electrical failure or for several off-grid
applications such as camping or in your RV.
B. Please read this instruction manual carefully and make sure your inverter is
installed properly before using.
16V
9.5~16VDC
9.8V
32V
19~32VDC
19.6V
Continuous power
Peak Power
Rated input voltage
Input voltage range
Input over voltage shutdown
Input low voltage shutdown
Input low voltage alarm
Output Voltage
Frequency
Wave form
Efficiency
Over heat protection
Over load protection
Short Circuit protection
USB output
No load current(12/24VDC)
Intelligent heat radiation
Working temperature
Storage temperature
Size (L×W×H)
Weight
Data
12V
24V
2200W
4400W
10.1V
20.2V
60Hz ±1Hz
Pure Sine Wave(THD≤3%)
Approximate 90%
Working only when temperature reaches
104°F± 41°F or load reaches above 800W.
0 ~ 40
℃
-10 ~ 45
℃
400×240×96mm
5.2Kg
65±5
℃
2200~2500W
Yes
5V, 2.4A
110~120V / 220V / 230V / 240V AC
±
10
%
(Subject to the label)
2A
1.6A
Item
Summary of Contents for PS-2200KAR
Page 1: ...MODEL PS 2200KAR...