7
3. Accessories Installation Steps
For safety reasons, please ensure that the power is disconnected before opening the case.
How to open the top cover and bottom cover
Unscrew the seven screws and remove the top cover. (CPU, SO-DIMM #1 and M.2 for WIFI are on
top side)
Unscrew the three screws and remove the two covers. (SO-DIMM#2 and M.2 for SSD are on bottom
side)
3.1 CPU Installation
1. Unscrew the screws and remove the CPU cooler.
2. Remove the hook to open the closure.
3. Put the CPU on the board and paint the top side with heat conduction grease.
4. Remove the closure and put the hook back.
5. Tighten up the screws.
Summary of Contents for PC610
