www.giadatech.com
4. Power
·
Enable Hibernation
·
ACPI Sleep State
This item is use to set sleep mode. Options:[S1][S3]
·
Resume In RTC Alarm
Use this item to set RTC awaking time and methods.
·
Restore AC power loss
This item is used for setting what state the system should be in when the AC
power is restored after power interruption. The options and their definitions are
as follows:
Fig 3.9
32
31
5. Chipset
This item includes “North bridge” and “South bridge” configuration.
5.1 North Bridge configuration
·
Total Memory
This item is use to set memory frequency.
·
Initiate Graphic Adapter
This item is use to set display controller. Default [PEG/IGD].
Fig 3.10
Fig 3.11
PIN
Definition
Power Off:
Power On
Last State
To allow the system to be in shutoff state
To allow the system to be started automatically.
To allow the system to keep the pre-power off state.
