8
7
1. Layout of motherboard
2. Installing memory
Please install the memory in accordance with the following procedures:
·
Align the golden finger of the memory to the groove of the interface slot and
pay attention the concave hole of golden finger should be aligned to the
convex point of the slot.
·
Finally, insert the memory into the interface slot gently. If no error occurs at
the moment, insert the card forward in the slot till the white buckle is
automatically engaged in the concave hole at the two sides of the memory.
Note
In order to avoid damages to the motherboard or the components, the user must
make sure the power supply to the computer is turned off before the memory or
other component is installed or removed. As the groove is set at the golden finger
of the DDR DIMM, the memory can only be inserted into the slot with one direction.
During installation, the user only needs to align the golden finger and the dual-
channel groove of the interface slot and insert it gently. To avoid damage, never
apply excessive force in that process.
3. Motherboard jumper setting
Note:
The user should notice that all sockets are marked with PIN1. The mark “#”
indicates the ex-factory default values.
www.giadatech.com
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1. PS/2 port
2. COM+LPT port
3. VGA port
4. RJ45+2* USB port
5. RJ45+2* USB port
6. JACK AUDIO port
7. Front audio
8. PCI Slot
9. USB Header
10. SATA
Ⅱ
port
11. Mini PCI-E
12. ATX 12V Power(20-pin)
13. DDR3 SO-DIMM Slot
14. CPU
15. NM10
16. COM Header
