48
47
Fig. 5.3
Fig. 5.1
·
On board VRAM configuration
1
.
Enter the BIOS setup, click on the Chipset tab. Enter the Chipset
Configuration interface, select the NorthBridge Configuration settings, which
shown in Figure 5.1
2. Select NorthBridge Configuration settings into the interface in Figure 5.2,
select the Internal Graphics Configuration settings. As shown in Figure 5.2
3. Click the Internal Graphics Mode, as shown in Figure 5.3, use the arrow
keys on the keyboard can be set against this, select the Disable mode, turn
off the motherboard integrated graphics output, this model
requires the use
of external graphics output; Select UMA mode Use only
the motherboard
integrated graphics chip output, onboard memory does
not work this time,
graphics chips share VRAM from memory; select SIDEPORT mode, integrated
graphics only work with onboard VRAM, not share memory calls were not from
the deposit; Select UMA + SIDPORT model supports both on-board VRAM
and shared memory. Click UMA Frame Buffer Size, you can set the display
chip shared VRAM size from the memory, use the arrow keys on the keyboard
can be set for the on-board VRAM.
www.giadatech.com
V. Appendix
Fig. 5.2
