17
16
2. Maintenance
As a high-tech product with sophisticated structure, Giada Mini PCs needs to be
maintained properly. Misuse or rough handling may result in damage or system
failure.
Caution:
Risk of explosion if battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions.
·
Body
Please prevent sharp objects from scratching on it. Make sure the power
supply to the host is cut off before cleaning the body. Never use wet cloth for
cleaning. Otherwise, water drops or other conductive liquid may go into the host.
To clean the base of the host, you should first remove the host. At the time,
you should put the host in a safe place where is won't slide down or fall onto
the ground
·
Handling
This product is an ultra-light PC
Never place the product at the edge of the table. Otherwise, it may fall on the
ground and be damaged.
Always check the peripheral equipment and the connection cables to see
whether they are properly arranged, so that people might not be stumbled by
the wire or equipment and equipment not damaged.
·
Radiation
Radiation is of great significance for PCs. Please place the product in a proper
position. Never block the air inlet and air outlet that are used for ventilation.
Do not place the product onto the bed, sofa or other soft objects for use.
Otherwise, the vents might be blocked and system halted because of the
overheating.
·
Interfaces
Never use other objects to jam the interfaces on the host, nor use sharp
objects to scratch the pins. Otherwise, the pins might be damaged. If there is
any poor contact, you can use a soft brush to dust the place.
VI. Troubleshooting
Giada Mini PC was designed with the latest technologies and strictly tested before
delivery. It can provide long continuous working period and few failures might occur.
You may encounter some simple problems on setup, operation or system
compatibility at times you use the product. In this part, we will present the information
on how to identify the cause of a failure and how to solve the problems.
Identification
: When your PC has a problem, please check it by referring the
information provided below:
1. PC has no reaction after the host is powered on.Make sure the power is supplied
to the host and the monitor, and check the power supply is normal running state.
If the hardware has been upgraded, make sure the new hardware was properly
and reliably installed. Check whether all signal cables are properly connected,
including cables between the keyboard and host, and mouse and host.
2. Host is automatically shut off. Please check whether the power supply is cut off,
or the power adapter is firmly inserted.
3.After the host is started, the start-up information appears. However, the operating
system can't be loaded. The start-up order of setup tools is not compatible with
the configuration of the PC, or a password is set for your operating system. In
the latter case, you should enter the password to load the operating system.
4. Speaker sounds when the system is being electrified. Check whether there is
any part inside the host, especially whether the hard disk and memory are
properly installed. Note: The shell of the host should be opened only with the
assistance of professionals from Giada.
5. When the system is started, it seems the set parameters of the host have been
www.giadatech.com