Giada cube N3, User Manual

Page: 7 / 31

11 10
2. Installing memory module
Please install the memory module in accordance with the following procedures:
1) Align the golden finger of the memory module to the contacts of the interface slot
and pay attention that the concave hole of golden finger should be aligned to the
convex point of the slot.
2) Finally, insert the memory module into the interface slot gently.
【 Caution 】 In order to avoid damages to the motherboard or the components, the
user must make sure the power supply to the computer is disconnected before the
memory module or other system component is installed or removed. The memory
card can only be inserted into the slot with one direction. During installation, the
user needs to align the golden finger and the interface slot and insert it gently. To
avoid damage, never apply excessive force in that process.
3. Setting motherboard’s jumpers and connectors
3.1 SATA data connectors
Please connect a SATA hard disk to this connector with included SATA data cable.
1
2
3
4
5
6
7
Pin Definition
Ground
Ground
Ground
TXP
TXN
RXP
RXN
1 4
1
2
3
GND
4
VCC 5V
2 3
GND
VCC 5V
3.2. SATA power connector
Please connect a SATA hard disk to this connector with included SATA power cable.
Pin Definition
1
2
3
12
V
4 PWM
TAC
GND
1 2 3 4
1 5V 2
3
USB DO-
4
5 6
7 8
9 10
USB DO
+
USB D1-
USB D1
+
1
2
9
10
1 MIC_L 2
3 4
5
6
7 8
9 10
1
2
9
10
MIC_R
NC
NC
NC
NC
NC
GND
3.3 CPU_FAN1 (CPU fan connector)
This connector is used for connecting CPU fan. The pins’ functions are defined as below.
3.4 F_USB1,F_USB2 (USB connectors)
These USB ports allow your system to be connected to the Card Reader, USB I/O
extension card and WiFi wireless network module (optional) at the side panel of the
chassis. The host provides two sets of USB extension port, both of which support USB
2.0 devices. The pins’ functions are defined as below.
3.5 F_AUDIO1 (audio board connector)
The audio board connector allows your system to be connected to the card reader board
with audio in/out at the side panel of the computer case. After connection, you can easily
control the audio-out and microphone-in through the side panel of the host.
The pins’ functions are defined as below.
Pin Definition
Pin Definition Pin Definition
Ground
Not used Empty
Ground
Pin Definition
Output of right channel
Output of left channel
Pin Definition
5V