Giada cube N3, User Manual

Page: 14 / 31

25 24
1.3 Installing on-board network interface driver
After you click “Install” to install the “Realtek 10/100/1000 Network Interface Card
Driver” shown in Figure 5.2, a dialog box as shown in Figure 5.5 will be popped up.
Then you can click Next and wait till the driver is installed completely.
1.4 Installing HDMI multimedia interface driver
After you click “Install” to install “Driver for HDMI Multimedia Interface” displayed as
Figure 5.2, a dialog box as shown in Figure 5.6 will be popped up. Then you can click
Next and wait till the driver is installed completely.
Figure 5.5
Figure 5.6
1.5 Installing driver for WiFi wireless network module (optional)
After you click “Install” to install “driver for wireless network interface card” shown in
Figure 5.2, you can install driver in accordance with the prompts seen in the
computer interfaces. Then re-start the computer.
Figure 5.7
In this chapter, knowledge on how to solve problems concerning hardware and software
will be introduced.
Your Giada Cube-N3 was wholly inspected before delivery. However, incorrect operation
or negligence in running the system might result in failures.
In this Chapter, possible failures relating to hardware and software you might encounter
when using the product will be described, causes thereof analyzed and solutions introduced.
Whenever you meet a problem, you can first address it by referring to the descriptions in
this chapter. If the problem still exists even after you try the solution introduced herein,
you should consult your local distributor for further information.
Chapter VI Troubleshooting