Flush mounting thermostat instructions K494IY001 - K494IY002
T E C H N I C A L C H A R A C T E R I S T I C S
Contact rating 5(3)A 250 V~
Micro-disconnection 1B
Voltage-free switching contact.
Power supply 230 V 50 Hz.
Max. ambient temperature 45 °C
Protection degree IP20
Pollution grade 2
Impulse voltage 4000 V
Class A software
Double isolation
Complies with standard CEI EN 60730-1
and second parts.
Classification of temperature control devices according to
the EU Reg. No. 811/2013 - 813/2013: energy class: IV, 2 %
C U S T O M I S I N G T H E T E M P E R A T U R E
November 2015
Additional information
For further information, visit the website www.giacomini.com or contact the technical service:
'
+39 0322 923372
6
+39 0322 923255
*
This information is intended as an example. Giacomini S.p.A. reserves the right to modify the contents - at any time and without prior warning - for technical or
commercial reasons. The information in this technical sheet does not exempt the user from scrupulously observing the existing regulations and standards relating
to good technical practices.
Giacomini S.p.A. Via per Alzo, 39 I-28017 San Maurizio d’Opaglio (NO) Italy
Product designed for Giacomini S.p.A. by F.C.
via dell’Osio N. 6 - 20090 Caleppio di Settala (Italy).
Not assembled in Italy.
once the desired mode has been
set,
press one of the two
buttons to set (increase or reduce )
the temperature:
ECONOMY /
T
MIN 2 ÷ 40 °C
COMFORT /
T
MAX 2 ÷ 40 °C
OFF (Antifreeze) 0 ÷ 7 °C
T E M P E R A T U R E S C A L E S E L E C T I O N
press both buttons simultaneously
to choose whether the display shows
degrees Celsius or Fahrenheit
W I N T E R / S U M M E R M O D E S E L E C T I O N
press both buttons simultaneously to
select either the SUMMER mode (coo-
ling) or WINTER mode (heating).
