Control System
Control System
4
(1) ON/OFF
For turning on or turning off the air conditioner.
(2) 26
℃
button
Press this button can operate the cool mode with the setting temperature 26
℃
. Considering about the comfort
and energy saving, 26
℃
is the best setting temperature.
(3) Mode select
Once pressing, running mode will be selected in the following sequence:
(4)Timer button
Under the OFF state only can set TIME ON function. If pressing the button, the time will increase by 0.5 hour.
When the set time exceeds 10 hours, pressing TIMER button will increase the time by 1 hour. Adjust the
TIMER ON to be
"
0:00
"
, then will cancel the TIMER ON.
Under the ON state only can set TIME OFF function. If pressing the button, the time will increase by 0.5 hour.
When the set time exceeds 10 hours, pressing TIMER button will increase the time by 1 hour. Adjust the
TIMER OFF to be
"
0:00
"
then will cancel the TIMER OFF.
(5) ECO button
When operating COOL, HEAT and AUTO mode, press the "ECO" button, and operate power save function;
press again will cancel the function. Under the DRY/FAN mode, this function is invalid. Under power save state,
press "MODE", "ON/OFF" or "FAN" button will cancel this function.
(6) Adjust button
▽
Decrease the set temp. Keeping pressing will decrease the temp with 1
℃
per 0.5s.
Adjust button
△
Increase the set temp. Keeping pressing will increase the temp with 1
℃
per 0.5s.
(7) Horiz swing
Press this button can activate or turn off wind horizontal swing function. (Only available when remote controller
is used with corresponding unit.)
(8) Fan speed
Fan speed will be selected in following sequence once pressing this button: (Under the DRY and AUTO mode
(except for the auto heat recycling mode), the fan speed will be fixed and cannot be adjusted. Under the auto
heat recycling mode, the fan speed will be automatically and can be adjusted.)
DRY
HEAT
FAN
→
→
→
→
AUTO
COOL
AUTO → LOW → MED → HIGH
