Add a New Temporary Access Pin-Number of Uses Based (Pin has limited number of uses.)
Step Button(s) Sequence to Press
LED/Alarm After
Pressing
Description
5
Press and Release
This tells the keypad that you have
completed entering the special code to
enable this feature.
6
Enter
New
Temporary Pin Number
(4 digits)
This is the Four Digit Temporary Pin
Number.
7
Press and Release
This tells the keypad that you have
completed entering your Four Digit
Temporary Pin Number.
8
Enter
Number of Temporary Pin Uses
(two
digits from 01-99)
This two digit number entered tells the
keypad how many times this Temporary
Pin can be used successfully before
it is automatically removed from the
keypad.
9
Press and Release
This tells the keypad that you have
completed entering the two digits for
number of uses.
10
Press and Release SEND
Completes the programming sequence
for this feature and exits the keypad
back to normal operation.
Sometimes, you would like to allow access to your property for a limited period of time. The following procedure
will allow you to program your keypad to enable this feature.
Add a New Temporary Access Pin-Period of Time Based (Pin has limited number of days before expiring.)
Step Button(s) Sequence to Press
LED/Alarm After
Pressing
Description
1
Press and Release
Puts the Keypad into Programming
Mode.
2
Enter
Master Pin
Completing this step actually allows
you into programming mode. Without
the correct Master Pin, then you will
not be able to proceed further.
3
Press and Release
This tells the keypad that you are going
to do program a special feature into
the keypad.
4
Enter 90
Code 90 tells the keypad that you will
be adding a Temporary Access Pin that
is only active for a set number of days.
5
Press and Release
This tells the keypad that you have
completed entering the special code to
enable this feature.
6
Enter
New
Temporary Pin Number (4 digits,
all numeric required)
This New Four Digit Temporary
Access Pin is now programmed into
the keypad.
Add a New Temporary Access Pin-Period of Time Based (Pin has limited number of days before expiring.)
Step Button(s) Sequence to Press
LED/Alarm After
Pressing
Description
7
Press and Release
This confirms that the four previous
numbers you entered into keypad are
your Temporary Access Pin.
8
Enter
Number of Days
before pin expires (2
digits 01-99)
This two digit number entered tells the
keypad how many days this Temporary
Pin can be used successfully before
it is automatically removed from the
keypad.
9
Press and Release
This tells the keypad that you have
completed entering the two digits for
number of days this will be active.
10
Press and Release SEND
Completes the programming sequence
for this feature and exits the keypad
back to normal operation.
If you would like to erase one Access PIN that is stored in the keypad, use the following procedure to perma-
nently erase this PIN. Once the following steps have been completed, you will need to reprogram this PIN if
you would like to use it again.
Erase A Single Access Pin
Step Button(s) Sequence to Press
LED/Alarm After
Pressing
Description
1
Press and Release
Puts the Keypad into Programming
Mode.
2
Enter
Master Pin
,
Press and
Release
Completing this step actually allows
you into programming mode. Without
the correct Master Pin, then you will
not be able to proceed further.
3
Enter 03
Code 03 tells the keypad that would
like to erase a single access PIN that is
already programmed in the keypad.
4
Press and Release
This tells the keypad that you have
completed entering the special code to
enable this feature.
5
Enter
Access Pin to be
Erased
This step tells the keypad which keypad
in memory should be erased so that it
no longer allows access to the property.
6
Press and Release SEND
Completes the programming sequence
for this feature and exits the keypad
back to normal operation.
