HD32.3TC
- 35 -
V1.1
7
INSTRUMENT STORAGE
Instrument storage conditions:
•
Temperature: -25…+65°C.
•
Humidity: less than 90% RH without condensation.
•
During storage avoid locations where:
•
humidity is high;
•
the instrument may be exposed to direct sunlight;
•
the instrument may be exposed to a source of high temperature;
•
there are strong vibrations;
•
there are steams, salt or any corrosive gas.
8
SAFETY INSTRUCTIONS
General safety instructions
The instruments have been manufactured and tested in compliance with the safety standard
EN61010-1:2010 “Safety requirements for electrical equipment for measurement, control and
laboratory use” and left the factory in a safe and secure technical condition.
The proper operation and the operational safety of the instruments can be ensured only if all the
regular security measures are observed as well as the specific measures described in this oper-
ational manual.
The proper operation and the operational safety of the instruments can be ensured only under
the climatic conditions specified in this manual.
Do not use the instruments in places where there are:
•
Rapid ambient temperature variations that may cause condensation.
•
Corrosive or flammable gases.
•
Direct vibrations, shocks to the instrument.
•
High-intensity electromagnetic fields, static electricity.
If the instruments are moved from a cold environment to a hot one or vice versa, the formation
of condensation might cause problems to their operation. In this case you need to wait for the
instrument temperature to reach ambient temperature before operation.
User obligations
The user of the instruments must make sure that the following regulations and directives related
to the handling of hazardous materials are fulfilled:
•
European directives on safety and health at work.
•
National regulations on safety and health at work.
•
Accident prevention regulations.
Summary of Contents for Delta OHM HD32.3TCA
Page 42: ...HD32 3TC 42 V1 1 NOTES...
Page 43: ......
