H69.0.01.6C-02
Operating Manual GMH 285 / GMH 285-BNC
page 4 of 8
_____________________________________________________
_____________________________________________________________________________
4.4 Pop-up clip
Handling:
• Pull at label “open” in order to swing open the pop-up clip.
• Pull at label “open” again to swing open the pop-up clip further.
Pop-up clip closed
Pop-up clip at position 90°
Pop-up clip at position 180°
Function:
• The device with a closed pop-up clip can be plainly laid onto a table or attached to a belt, etc.
• The device with pop-up clip at position 90° can be set up on a table, etc.
• The device with pop-up clip at position 180° can be suspended from a screw or the magnetic holder
GMH 1300.
Device attached to a belt
Device set up on a table
Device suspended from
magnetic holder
GMH 1300
5 Start of Operation
Switch the device on with the key
. After segment test
the device displays some information to
its configuration:
![ !F
selected display unit (p.r.t. chapter 8)
0FFS
if there is a offset adjustment (p.r.t. chapter 8)
S[AL
if there is a slope adjustment (p.r.t. chapter 8)
P.OFF
if the automatic-off-function is activated (p.r.t chapter 6)
The device starts measurement afterwards.