GHM Greisinger G 1110, Operating Manual

Page: 11 / 28

G 1110 Operation | 5
B-H88.0.01.DB2-1.0 11 / 28
5 Operation
5.1 Commissioning
5.1.1 Explanation
The product is switched on with the
On/Off button
. It may be necessary to configure
the product after switching on. See
Configuration [

11]
.
– Sufficiently full batteries are inserted in the product.
–
Press the
On/Off button
.
POFF
Automatic shut-
off Automatic shut-off activated. The product is
switched off if no buttons have been pressed after
the adjusted time
PR
.
OF
Offset correction Calibration of the pressure sensor by the customer
PR
.
.SL
Gradient correc-
tion Calibration of the pressure sensor by the customer
SEA
.
L
Nautical norm
correction Nautical norm correction active. Display air pres-
sure compensated to sea level
–
The product is now ready for measurement.
5.2 Configuration
5.2.1 Explanation
The following steps describe how to adapt the product for your purposes.
NOTE
There are various configuration parameters available depending on the product ver-
sion and configuration. These can vary depending on the product version and configu-
ration.
5.2.2 Opening the configuration menu
In order to configure the product, you must first open the
Configuration
menu. The
menu is opened as shown in the illustration.
– The product is switched on.
1. Press the
Function key
for 2 seconds to open the
Configuration
menu.
2.
(ONF
appears in the display. Release the
Function key
.
3. By briefly pressing the
Function key
, you can scroll through the parameters. Select
the parameter you would like to configure.
4. When you have selected the desired parameter, change the parameter to the de-
sired value with the
Up button
or the
Down button
.
Description
Prerequisite
Instruction
Outcome of an action
Description
Prerequisite
Instruction