Instruction Manual
Mitras LX7
EN
2016-12-27
17
6.2.1
Requirements
You will need to download the appropriate
GHL Control Center
version for the firmware of the
respective
Mitras LX7
.
Operating System compatibility: Microsoft Windows Vista® and Windows 7®, Windows 8®,
Windows 10®.
The connection to the
Mitras LX7
can be established via USB:
After successful installation, connect
Mitras LX7
to your PC using the USB cable. The driver is
installed automatically.
6.2.2
GCC General Information
With the
Load
button, the settings of the
Mitras LX7
are read out and the program displays
are updated. Clicking the
Save
button will store the settings you have made in the program
and transfer it to the device.
6.2.3
What can be set via
GCC
With
GCC
, you have access to almost all settings. Some features can only be carried out
directly on the device.
6.3
How to Connect between the Mitras LX7 and PC
Two steps must be taken before your
Mitras LX7
can be operated with a PC:
PC and ProfiLux must be connected with a cable via USB
The PC program
GCC
must be set up
Then proceed as follows:
Open the GCC application and connect the USB cable to your device and PC.
Navigate to "Administration" -> "Connections" -> "Device Manager". In Device Manager, you
will see "GHL Virtual Communications Port" for your device. (Illustration shown below)
